EVA Sheets EVAPLAST

Листы EVA ЭВАПЛАСТ
Описание

EVA material (ethylene-vinyl acetate) occupies a special place among modern polymers. It is an environment-friendly highly-efficient foam rubber – composite polymer material, classified as polyolefin. In spite of its porous structure, the material described is fully unable to absorb moisture while its resistance to deformation can achieve quite high rates. For instance, a sheet having density only 0.25 gram per cubic centimeter Shore hardness achieves 70. And what is equally important, elasticity figures remain almost unchanged! Thickness of Evaplast produced at present varies from 2 to 50 mm. There are no limits with regard to colors; therefore a color scheme is extremely diversified. Besides, this material is absolutely odorless, what is of prime importance when it is used as floor covering in residential and public buildings. Evaplasts are cut by knives or scissors (when being laid on the floor), as well as by blanking (when being used for shoe soles).

rub. / sheet

Coating sheets with adhesive – due date 3 working days.
Please, contact managers to obtain more accurate cost calculation.

 

Characteristics of the material:

 

  • Extraordinary lightness – it is 4 times lighter than PVC;
  • EVA is an orthopedic material, what means its typical features are elasticity, resilience and flexibility;
  • Excellent  shock absorption;
  • High wear resistance;
  • Dielectricity;
  • Resistance to chemical substances (oils, solvents);
  • Hygienic property (resistant to bacteria and fungi);
  • It provokes no allergic reactions, which makes it fit for use in all kinds of orthopedic goods.

Characteristics

EVA 40

Material

EVA (этилвенилацетат)

Standard ASTM D - 1056

RE 42/2A2

Cell structure

closed

Color

black, white, colored

Relative density - (ISO 845-88 - ASTM D 3575)

100 +/- 10 kg/m³ when ordering from 50 to 200 kg/m3

Water absorption - (ASTM D 1056)

< 5%

Service temperature range  (ASTM D 3575)

-30ºС + 65ºС

Linear change at 70  ºС during 7 days ( ASTM D 1204)  thermal shrinkage

<10%

Elongation at rupture     - (ASTM  D  412)  -  reversible elongation deformation

>100%

Tensile strength - (ASTM D 412)

18 kg/cm²  (1800 kPa)

Tear strength - (ASTM D 624)

kg/cm  (0,6 kN/m)

Resistance to:

air + UF - high, ozone 48 h/200 pphm

Shore hardness (ASTM D 2240)

40 +/- 5 when ordering from 20 to 75

Fire resistance

passes through, (MVSS 302 - FIAT 50433)